Applying Weatherstripping

To determine how much weatherstripping you will need, add the perimeters of all windowsand doors to be weatherstripped, then add 5% to 10% to accommodate any waste. Also consider that weatherstripping comes in varying depths and widths.

Weatherstripping supplies and techniques range from simple to the technical. Consult the instructions on the weatherstripping package.

Here are a few basic guidelines:

  • Weatherstripping should be applied to clean, dry surfaces in temperatures above 20°F (-7° C).
  • Measure the area to be weatherstripped twice before making a cut.
  • Apply weatherstripping snugly against both surfaces. The material should compress when the window or door is shut.

When weatherstripping doors:

  • Choose the appropriate door sweeps and thresholds for the bottom of the doors.
  • Weatherstrip the entire door jamb.
  • Apply one continuous strip along each side.
  • Make sure the weatherstripping meets tightly at the corners.
  • Use a thickness that causes the weatherstripping to press tightly between the door and the door jamb when the door closes without making it difficult to shut.

For air sealing windows, apply weatherstripping between the sash and the frame. The weatherstripping shouldn’t interfere with the operation of the window.

 

3 Easy Steps To Your Door Sweep Install

Cinch Door Seals are a fast and easy way to save money by sealing your doors against drafts and leaks. Say goodbye to drills, screws, screwdrivers or pilot holes. Simply measure, trim, peel and stick your way to energy savings in any season. Specially developed with 3M Adhesive Technology, Cinch installs in mere minutes and lasts for years.

Less than 10 minute installation
What once took 30 minutes to an hour with traditional weather-stripping can now be accomplished in minutes. The superior seal and premium adhesive will have you saving money on heating and cooling bills in no time.

As easy as measure, trim, peel and stick!

Take a look at our Cinch Door Seals.

Choosing A Weatherstrip

Choose a type of weatherstripping that will withstand the friction, weather, temperature changes, and wear and tear associated with its location. For example, when applied to a door bottom or threshold, weatherstripping could drag on carpet or erode as a result of foot traffic. Weatherstripping in a window sash must accommodate the sliding of panes — up and down, sideways, or out. The weatherstripping you choose should seal well when the door or window is closed but allow it to open freely.

Continue reading “Choosing A Weatherstrip”